Lightning Menu Option Page 2
The second option page of the Lightning function lets you
select options for the choices of Demo, Self-Test for the
Stormscope, Noise Monitor, and Strike Test. The last
option selection takes you back to the first page of options.
Demo
The Demo option places the WX500 sensor in a
demonstration mode that simulates lightning strikes.
Self-Test
The Self-Test option performs a number of tests on the
operation of the WX500 and provides a report of its status.
Noise Monitor
The Noise Monitor feature is a function of the WX500.
For details about using this feature refer to the WX500
owner’s documents.
The Noise Monitor displays reports of electrical noise,
whether they are from lightning or other noise sources
within the range of the system. This function is used to
help determine if electrical noise is present that may affect
normal system operation.
84
Detailed Operation
To Next Page
Loading...
Need help?
General
