GarrettCom DynaStar DS2000-TS User Manual

A
PPENDIX
A -
Port Functions
Port Menus
DS2000-TS Administrator’s Guide
A - 3
Figure A-3. Port Status Menu
A.1.1 Functions for Port n Menu
The Functions for Port menu allows the user to select the port function desired. The user can select from the
following:
•
Configuration
•
Statistics
• Disable/Enable
• Protocol Monitor
The Functions for Port menu is shown in Figure A-4.
Table A-1. Port Status Attributes
Display Attribute Description
Port Number The port number is the physical location assigned to the ports. En designates an
Ethernet port and Sn designates a serial port.
Name Name assigned to the port by the user.
Interface The electrical interface of the port.
Protocol Identifies the protocol assigned.
State Either Enabled or Disabled.
Status Indicates the current status of the physical and logical connection to another device and
is designated by either Up or Down. If Spanning Tree protocols are being used on the
network, and the port is enabled, this field provides the current state of the port within
the Spanning Tree, i.e., Forwarding, Blocking, Listening, or Learning.
*** Port Status ***
DynaStar 2000 12-11-05 7:33:55
Ethernet SLOT 1 SLOT 2
Port number: E0 S1 - S16 S17 - S32
Name: Ethernet MUSART MUSART
Interface: IS-Enet
Protocol: Ethernet
State: Enabled
Status: Link Down
Sync/Async HS WAN 1 HS WAN 2 Console
Port number: S0 CON
Name: Sync/Async No board No board Console
Interface: RS-232 RS-232
Protocol: PAD Console
State: Enabled Enabled
Status: Down Up - 1
Enter slot # to view status of multiple-port module:
_________[DynaStar_6b2c]__________ Enter Port Number:
Press ESC to return to previous menu

GarrettCom DynaStar DS2000-TS Specifications

General

Brand	GarrettCom
Model	DynaStar DS2000-TS
Category	Server
Language	English