A
PPENDIX
A -
Port Functions
Configuration
DS2000-TS Administrator’s Guide
A - 7
Figure A-6. Async Port Configuration Menu
Table A-3. Async Port Configuration Menu
Parameter Definition Default Range
Port The internally assigned identification of this port Sn IS-232 N/A
Port Type Allows user to define the port type for this interface.
PAD allows the user to select a predefined port
profile.
PAD PAD or
Transparent
Port Name The display name for this port within the Supervisor
application menus
Serial-Sn 14 alphanumeric
characters
Line Speed Speed of the port 9600 Toggle values
300 bps -
230.4 Kbps
Parity Parity setting for Async port. 7-EVEN Toggle values
7 - auto/even/odd/
mark/space
8 - even/odd/mark/
space/none
Ignore DSS Allows the async port to ignore or not expect data
set signals from the connected device when set to
Y.
Setting to N will cause the port to expect data set
signals (DCD).
NN (No)
Y (Yes)
Profile Predefined parameters, using either preconfigured
or customer defined profile, for the async
connection.
89(14) Refer to PAD
profiles in
Appendix B,
“Net
work Commands”
.
*** Async Port Configuration ***
Port: S1 IS-232
Port Type: PAD
Port Name: SERIAL-S1 (14)
Line Speed: 9600 Baud
Parity 7-EVEN
Ignore DSS N
Profile 89(14) CRT
________[DynaStar_b441334]________ Process selections (Y/N): Y
Use <TAB> and CURSOR to move fields Press ESC to return to previous menu
Use <CTRL-D> to delete entry Press <CTRL-O> for more options
To Next Page
Loading...