A
PPENDIX
B -
Network Commands
Router (IP)
DS2000-TS Administrator’s Guide
B - 12
Figure B-11. Helper/Client Configuration Menu
B.2.6.2 DHCP Server
This feature allows hosts connecting to the network to be automatically configured with an IP address sent
by the DS2000-TS, default router, and the addresses of up to three DNS servers. Optionally, an IP address
can be statically assigned to a particular MAC address.
To configure the DHCP Server, select <2> Server Configuration, as described above. An example of the
screen is shown in Figure B-12.
This DHCP Configuration screen defines the IP addresses that are held by the DS2000-TS DHCP Server
and allocated upon request to the devices attached to the DS2000-TS.
&
&&
&
NOTE: The total number of IP Addresses that the DS2000-TS DHCP server will assign is
50. Addresses made available beyond a total of 50 will never be used. The operator is not
prevented from defining additional addresses, but only the first 50 will be assigned.
*** Helper/Client Configuration ***
DHCP Client Poll Interval: 0 0-Dis, 1-255 Secs.
BootP Server1: 0.0.0.0 IP Address
BootP Server2: 0.0.0.0 IP Address
BootP Server3: 0.0.0.0 IP Address
BootP Helper Enabled N
__________[DynaStar_24]___________ Process selections (Y/N): Y
Use <CTRL-D> to delete entry <RET> to toggle or type value
Use <TAB> and CURSOR to move fields Press ESC to return to previous menu
To Next Page
Loading...