www.gateway.com
49
4 Disconnect the cables from the 5.25-inch component,
noting their locations and orientation. You will reconnect
the cables after you reinstall the component. (DVD drive
shown.)
5 Pull the release latch down to the Unlock position on the
5.25-inch bay, then slide the component forward and out
of the bay.
6 Lift the 5.25-inch component bay from the chassis to
remove it.
7 Disconnect the fan cable from the system board.
8512732.book Page 49 Thursday, September 27, 2007 11:33 AM
To Next Page
Loading...
