45
www.gateway.com
Adding and removing a PC Card
Adding and removing a PCCard
Your notebook has a PC Card slot (also known as a PCMCIA card slot).
This slot accepts one Type II card.
You do not need to restart your notebook when changing most cards
because your notebook supports hot-swapping. Hot-swapping means that
you can insert a PC Card while your notebook is running. If your PC Card
does not work after hot-swapping, see the PC Card manufacturer’s
documentation for further information.
To insert a PC Card:
■ Push the card firmly into the PC Card slot label-side up until the
outer edge of the card is flush with the side of your notebook.
To Next Page
Loading...
