PanaFlow™ LC User’s Manual 7
Chapter 2. Installation
2.4.1 Strap Clamping Fixture
The Strap Clamping Fixture (SCF) (see Figure 5 below) acts as a spacing device, a transducer holder, and a
transducer aligner. The SCF includes two U-shaped blocks connected by a slotted bar and four hose straps.
The SCF is strapped around the pipe, and the blocks are used to hold the transducers in position for accurate
measurements. The blocks must be positioned properly using the spacing dimension calculated by the
flowmeter. Then, the transducers are mounted into the blocks.
Figure 5: Components of the SCF
To Next Page
Loading...
