GE Baker Hughes PanaFlow LC XMT1000 - Chapter 3. Programming; 3.1 Introduction; 3.1.1 HMI Features

PanaFlow™ LC User’s Manual 33
Chapter 3. Programming
Chapter 3. Programming
3.1 Introduction
This chapter has instructions for programming various features of the PanaFlow™ XMT1000 flow
transmitter. In this chapter, we will list all available options. The user can then change the User Preferences
and Inputs/Outputs settings, Programming for flow measurements and Calibration to meet their needs.
IMPORTANT: Not all users will have access to all of the menus. Some menus are restricted to only those users
with the proper passcodes.
3.1.1 HMI Features
Figure 47: XMT1000 HMI
The six keys on the magnetic keypad are used to program the XMT1000:
Key Symbol Key Name Functions
 Escape Key To cancel a numeric entry change, exit a menu or as Back key

Enter Key To accept a numeric entry or select a menu option
 Left Arrow Key To navigate among menu choices, pages or set cursor position
 Right Arrow Key To navigate among menu choices, pages or set cursor position