3.2 Indicators and switches
Status indicators
The status indicators on the front panel are described below.
FunctionIndicator
Lit when power is onReady (green)
Lit when the temperature at the flow cells is stable at the
preset temperature. Flashes when the temperature is not
stable.
Temperature (yellow)
Lit when a sensor chip is docked and ready. Flashing when
a chip is inserted but not docked.
Sensor chip (green)
Lit when a run is in progress.Run (green)
Mains power switch
The mains power connector and switch is located on the mains input panel, at the rear
right of the instrument (see Connections, on page 35).
36 Biacore X100 Operating Instructions 28961142 AD
3 System description
3.2 Indicators and switches
To Next Page
Loading...
