4.2 Unpacking, assembly and transport
Unpacking
Biacore X100 will be unpacked by GE personnel.
Check the equipment for any apparent damage before starting installation. Document
any damage carefully and contact your GE representative.
Contact GE if you need to re-pack Biacore X100 for storage or transport.
Assembly
Biacore X100 requires no special assembly other than that performed by GE personnel
during installation.
Transport
To avoid damage, the optical unit in Biacore X100 must be secured before transport
over more than limited distances within the laboratory. Contact GE for assistance.
CAUTION
Heavy object. Use proper lifting equipment, or use two or more
persons when moving the instrument. All lifting and moving must
be performed in accordance with local regulations.
CAUTION
Wear protective shoes with steel toecaps when moving the instru-
ment to protect against falling objects.
CAUTION
Make sure that hands or fingers are not trapped under the instru-
ment when the instrument is lifted or moved.
Biacore X100 Operating Instructions 28961142 AD 43
4 Installation
4.2 Unpacking, assembly and transport
To Next Page
Loading...
Need help?
General
