GE Biacore X100 User Manual

7 Troubleshooting
About this chapter
This chapter gives a brief guide to troubleshooting procedures for problems with
Biacore X100.
To avoid problems, follow the instructions and recommendations given in these Operating
Instructions, and clean and maintain the instrument regularly as described in Chapter 6
Maintenance, on page 61. If you are experiencing problems that you cannot correct,
contact your local service representative.
In this chapter
See pageSection
787.1 Instrument related problems
827.2 Other problems
Biacore X100 Operating Instructions 28961142 AD 77
7 Troubleshooting

GE Biacore X100 Specifications

General

Type	Surface Plasmon Resonance (SPR) System
Application	Biomolecular interaction analysis
Detection Method	Surface Plasmon Resonance (SPR)
Temperature Control	4-40°C
Software	Biacore X100 Control Software
Power Requirements	100-240 V, 50/60 Hz
Sample Type	Proteins, nucleic acids, small molecules
Flow Rate Range	1-100 μL/min
Data Analysis	Affinity, kinetics, concentration, specificity
Flow System	Microfluidic
Dimensions	60 cm (W) x 50 cm (D) x 45 cm (H)
Throughput	High throughput
Sample Capacity	Up to 96 samples