GE Biacore X100 User Manual

Electrical power requirements
WARNING
Protective ground. The product must always be connected to a
grounded power outlet.
WARNING
Use only mains cables supplied or approved by GE.
WARNING
Do not block the rear or side panels of the instrument. The power
switch must always be easy to access. The power cord must always
be easy to disconnect.
The instrument requires mains power outlets with protective earth as specified in the
table below.
SpecificationParameter
100 to 240 V~Supply voltage
50/60 HzFrequency
400 VAMaximum power
Overvoltage category IITransient overvoltages
Biacore X100 Operating Instructions 28961142 AD 41
4 Installation
4.1 Site requirements

GE Biacore X100 Specifications

General

Brand	GE
Model	Biacore X100
Category	Medical Equipment
Language	English