ActionStep
In the login-dialog, enter your user name and password and click OK. (Your
user name and password are provided by your Biacore X100 administrator.)
5
If you need to select a different database connection, click Options>>. The
default setup is This machine.
The software establishes connection with the instrument, which takes about
30 seconds.
6
Make sure that there is fresh buffer or water in the bottle on the left-hand
tray and that both buffer tubes are inserted into the bottle.
7
Make sure that the waste bottle on the right-hand tray is empty and the
waste tube is inserted in the bottle.
8
The system event log is displayed in the software and the startup procedure
is recommended. Click Run now and follow the instructions on the screen.
A previously used chip can be docked for the startup procedure (see Sec-
tion 5.4 Inserting a sensor chip, on page 54 for instructions on docking a
sensor chip).
9
Once the startup procedure is finished, the instrument is automatically left
in standby mode.
Biacore X100 Operating Instructions 28961142 AD 51
5 Operation
5.2 Starting the instrument
To Next Page
Loading...
