GE C70 User Manual

CHAPTER 6: ACTUAL VALUES STATUS
C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL 6-5
6
6.3.3 RxGOOSE boolean inputs
ACTUAL VALUES  STATUS  RxGOOSE BOOLEANS
6.3.4 RxGOOSE DPS inputs
ACTUAL VALUES  STATUS  RxGOOSE DPS
6.3.5 Teleprotection inputs
ACTUAL VALUES  STATUS  TELEPROTECTION INPUTS
The present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed is
that of corresponding remote output unless the channel is declared failed.
6.3.6 Contact outputs
ACTUAL VALUES  STATUS  CONTACT OUTPUTS
 RxGOOSE BOOLEANS


RxGOOSE BOOLEAN 1
STATUS: Off
Range: On, Off


RxGOOSE BOOLEAN 256
STATUS: Off
Range: On, Off
The C70 is provided with optional IEC 61850 capability. This feature is specified as a software option at the time
of ordering. See the Order Codes section of chapter 2 for details.
 RxGOOSE DPS


RxGOOSE DPS 1
Status: Intermediate
Range: On, Off, Intermediate, Bad


RxGOOSE DPS 16
Status: Intermediate
Range: On, Off, Intermediate, Bad
The C70 is provided with optional IEC 61850 capability. This feature is specified as a software option at the time
of ordering. See the Order Codes section of chapter 2 for details.
 TELEPROTECTION
 INPUTS

TELEPROTECTION
INPUT 1-1: Off
Range: On, Off


TELEPROTECTION
INPUT 1-16: Off
Range: On, Off

TELEPROTECTION
INPUT 2-1: Off
Range: On, Off


TELEPROTECTION
INPUT 2-16: Off
Range: On, Off
 CONTACT OUTPUTS


Cont Op 1
Off
Range: On, Off, VOff, VOn, IOn, IOff


GE C70 Specifications

General

Brand	GE
Model	C70
Category	Protection Device
Language	English