K114 Issue No. 9
6 - 31Druck ADTS 405 User Manual
6
FIG 6-3 ARINC 565 OPERATING LIMITS
ALTITUDE CORRECTION
The altitude correction value for a specific aircraft may be entered as well as its limits.
The altitude correction value can be changed during operation in full and minimum
set-up modes using SETUP, [ALT]. See SETUP, [ALT] for further details on altitude
correction.
SAVING LIMITS
When all limits and associated functions are set, press CLEAR/QUIT to exit the limit
editing screen.
If changes have been made, the display shows a request for confirmation before
saving the changes.
If the system detects any errors (e.g., duplicate aircraft names, values out of range or
editing system-defined limits) the display changes to the edit screen for the error to be
corrected.
To Next Page
Loading...
