6 - 1
Druck ADTS 405 User Manual
K114 Issue No. 9
6
6 REFERENCE AND SPECIFICATION
6.1 Introduction
This section includes a full description of each key function including references to
associated functions.
The available keys are:
F1 - F4
ALT/Ps
SPEED/Qc
MACH/Pt
EPR
ROC/Ps RATE
RATE TIMER
HOLD
RATE
LEAK MEASURE/CONTROL
GROUND
PORT
REMOTE
PRINT
EXECUTE TEST PROGRAM
HELP
SETUP
s (nudge up)
t (nudge down)
0 to 9
- 000
CLEAR/QUIT
ENTER
. (decimal point)
Double key presses give:
ABORT (CLEAR + ENTER)
CONFIGURATION (F1 + SETUP)
6.2 Main Pressure Display
F1 - F4
These function keys or soft-keys are used to select choices from menus. The menu
choices may be shown directly over the keys or displayed as a list.
When a menu is displayed, press the appropriate function key to select the required
choice.
CLEAR /QUIT can be used to leave a menu without making a selection.
To Next Page
Loading...
