GE Druck ADTS 405 - Figure

K114 Issue No. 9
5 - 6
Testing and Fault Finding
FIGURE 5-1 FAULT FINDING CHART
N
Y
F1
N
N
N
Y
Y
Y
SET POWER SWITCH
TO OPERATE
Y
HAND-TERMINAL
FITTED
?
HAND-TERMINAL
FITTED
?
POWER
INDICATOR
ON
?
FRONT PANEL
DISPLAY FITTED
?
N
N
Y
N
Y
F6
F5
Y
F4
F8
F2
F9
STATUS LIGHT
HAND-TERMINAL
BACKLIGHT ON
?
N
F9 F2 F10
POWER-UP SEQUENCE
COMPLETED WITHOUT ERRORS.
IF ANY FURTHER ERRORS OCCUR
THE SYSTEM LOGS THE OCCURRENCE
AND DISPLAYS AN ERROR MESSAGE
STATUS LIGHT
FROM NOW ON,
REFER TO ERROR CODES FOR FAULT
FINDING PROCEDURE
IF ANY ERRORS OCCUR
THE SYSTEM LOGS THE OCCURRENCE
AND DISPLAYS AN ERROR MESSAGE
TO CONFIRM SERVICEABILITY,
CARRY OUT THE
STANDARD SERVICEABILITY TEST
FUNCTIONAL TESTING
COMPLETE
MAKE SURE POWER-UP SEQUENCE
IS COMPLETED WITHOUT ERRORS
N
Y
N
POWER-UP
MESSAGE
?
HAND-TERMINAL
DISPLAY POWER-UP
MESSAGE
?
Power-up sequence
DK282 version xx.xx
Display Power Up
Please Wait
DRUCK
ADTS 405
DK 263
Ver 6.xx
Last Calibration
mm/dd/yy (mdy)
PLEASE WAIT
RPT Transducer
Self Test
PLEASE WAIT
Measuring Ground
Pressures
PLEASE WAIT
Equalising System
Pressures
(Valves May Pulse)
PLEASE WAIT
ALT 0 ft
Leak Measure
CAS 0.0 kts
Leak Measure
WARMUP
SYSTEM STATUS
RED
SYSTEM STATUS
ORANGE
SYSTEM STATUS
GREEN
STATUS LIGHT
F8
F2F9
YN
HAND-TERMINAL
FITTED
?
F7
FLASHING
RED/ORANGE
GREEN
RED
OFF
FLASHING
RED/ORANGE
OFF
RED
FRONT PANEL
DISPLAY POWER-UP
MESSAGE
?
FRONT PANEL
DISPLAY POWER-UP
MESSAGE
?
FLASHING
RED/
ORANGE
GREEN
RED
OFF
F3
F7 F2
F9
STATUS LIGHT
FLASHING
RED/ORANGE
OFF
RED
GREEN