GE Druck ADTS 405

K114 Issue No. 9
Druck ADTS 405 User Manual
5 - 17
5
Note:
Some errors display
extra information
using a four digit
hexadecimal code.
This should always be
recorded with the error
number to provide
information for the
repair depot.
rorrE
edoC
egasseMrorrE
lamicedaxeH
edoC
515YDAERREGNOLONUSP
615RORRERELLORTNOCNWONKNU
715TUOEMITGNIR
055ERULIAFROSNESYTIDIMUHsP
155ERULIAFROSNESYTIDIM
UHtP
106RORREMARLANRETNI
306MORPEEOTGNITIRWRORRE
306DETTIFTONROYTLUAFSMORPEEMETSYS
107RORRETSET-FLESsP
!
207RORR
ETSET-FLEStP
!
307RORRETUOEMITTSET-FLESsP
407RORRETUOEMITTSET-FLEStP
017RORRERELLORTNOCsP
!
117RORRERELLORTNOCs
P
!
217RORRERELLORTNOCsP
!
317RORRERELLORTNOCsP
!
417RORRERELLORTNOCsP
!
717RORRERELLORTNOCsP
!
027RORRERELLORTNOCtP
!
127RORRERELLORTNOCtP
!
227RORRERELLORTNOCtP
!
327RORRERELLORTNOCtP
!
427RORRERELLORTNOCtP
!
727RORRERELLORTNOCtP
!
108NEPOOTDELIAFREVIRD884EEEI
208TESEROTDELIAFREVIRD884EEEI
009ERAWTFOSLANRETNI
999RORRELANRETNI
5.8 Fault Finding
5.8.1 Error Messages
 In the event of a malfunction, the built-in, self-test and diagnostic system
displays an error message and error code. A unit displaying this type of error
should be returned to the repair depot:
TABLE 5-2 ERROR MESSAGES
IMPORTANT NOTE
If the display shows
ERROR 703 START UP
Ps SELF TEST
TIME ERROR.
Check that the
expansion port plug
(item 13, Table 2-1) is
correctly connected in
the expansion port on
the rear panel (Fig. 2-4).