GE Druck ADTS 405 - Config, [Limits],[Edit Limits],[Max Limits]; Config, [Limits],[Edit Limits],[Edit New]; Config, [Limits],[Clear Limits]; Config, [Limits],[Lock Aircraft]

K114 Issue No. 9
Reference and Specification
6 - 32
CONFIG, [LIMITS], [EDIT LIMITS], [MAX LIMITS]
 This function makes a set of maximum limits; a set of MAX limits can be edited using
CONFIG, [LIMITS], [EDIT LIMITS], [EDIT EXISTING] and saved with a new name. This is a
quick method for setting-up a set of limits similar to the maximum system limits.
 The system displays an error message if MAX limits already exist.
CONFIG, [LIMITS], [EDIT LIMITS], [EDIT NEW]
 This function is identical to [EDIT EXISTING] and creates a new set of limits. Default
values are taken from "Standard" limits. See [EDIT EXISTING] above for further details.
CONFIG, [LIMITS], [CLEAR LIMITS]
 This function clears an existing set of limits. Use [NEXT] or [PREV] to display the name
of the limits. Select [SEL] to clear the limits followed by [YES].
CONFIG, [LIMITS], [LOCK AIRCRAFT]
 This function prevents changes to the default limits.
 If lock is [ON], no changes to the power-up default aircraft limits can be made from set-up.
CONFIG, [LIMITS], [DEFAULT AIRCRAFT]
 This function selects the set of limits used at power-up.
 Use [NEXT] or [PREV] to display the name of the required limits. Select [SEL].
CONFIG, [MORE], [CONTROL], [CONTROL MODE]
 CONFIG equivalent of SETUP function.
CONFIG, [MORE], [CONTROL], [CONTROL LOCK]
 This function prevents changes to the default CONTROL SETTING.
 If lock is [ON], no changes to the control channel selection can be made from set-up.
CONFIG, [MORE], [DISPLAY/OPTIONS], [DISPLAY TYPE]
 CONFIG equivalent of SETUP function.
CONFIG, [MORE], [DISPLAY/OPTIONS], [OPTIONS]
 Refer to the option user manuals.
CONFIG, [MORE], [DATE/FORMAT]
 This functions allows the display date format to be selected between [MDY] (mm/dd/
yy) and [DMY] (dd/mm/yy).