GE Druck ADTS 405

1 - 3Description
K114 Issue No. 9
1
1.2 Operating Range and Performance
 The ADTS 405 is supplied in one of two full-scale ranges (850 knots or 1000 knots) for
measurement and control of the pitot pressure channel.
 Operating limits are set, pre-defined tabular limits known as STANDARD, CIVIL and MAX
these can be selected through the SETUP menu (see Reference section 6). Operators
may also configure the display to aeronautical or pressure units but should be aware
that when units of pressure are selected, wider full-scale pressure limits will be enabled
for some parameters.
1.3 Operating Limits
The following sets of operating limits are supplied with the ADTS 405.
850 knot range operating limits
retemaraP stimiLxaM stimildradnatS stimilliviC
tlAniMtf000,3-tf000,2-tf000,1-
tlAxaMtf000,501tf000,08tf000,05
SACniMstk001-stk0.0stk0
SACxaMstk058stk05
8stk054
sPniMrabm0.3rabm516.72rabm279.511
sPxaMrabm00.5531rabm756.8801rabm604.0501
cQniMrabm00.253,1-rabm0.0rabm0
c
QxaMrabm00.007,1rabm00.8861rabm10.863
hcaMxaM53.215.21
CORxaMnim/tf000,001nim/tf000,9nim/tf000,6
SACetaRxaMnim/stk
000,2nim/stk006nim/stk006
sPetaRxaMnim/rabm00.000,01nim/rabm00.002nim/rabm00.001
cQetaRxaMnim/rabm00.000,01nim
/rabm00.002nim/rabm00.001
stimiLCNIRAFFOFFOFFO
noitcerroCtlAtf0tf0tf0