GE LOGIQ E9 User Guide

Measurement and Analysis
LOGIQ E9 – User Guide 2-33
Direction 5454884-100 English Rev. 1
To edit a worksheet
To change data on a worksheet:
1. To position the cursor at the field you want to change, move
the Trackball. The field is highlighted.
2. Press Set.
3. Type the new data in the field. The new data is displayed in
blue to indicate that it was manually entered.
To delete or exclude data on a worksheet:
1. To position the cursor at the field you want to delete or
exclude, move the Trackball. The field is highlighted.
2. Do one of the following:
• To delete the field, select Delete Value.
• To exclude the field, select Exclude Value.
The data in the field is not visible and is not included in
worksheet calculations.
• To include a value that you previously excluded, select
Exclude Value.
To type a comment on a worksheet:
1. Select Examiner’s Comments. The Examiner’s Comments
window opens.
2. Type comments about the exam.
3. To close the Examiner’s Comments window, select
Examiner’s Comments.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor