GE LOGIQ E9 User Guide

Moving the System
LOGIQ E9 – User Guide 1-21
Direction 5454884-100 English Rev. 1
Operator Panel Movement Controls
The system Operator Panel can be freely moved in all
directions. The vertical displacement of the Operator Panel is
motor driven. The control buttons are located adjacent to the
handles.
Figure 1-10. Operator Panel Movement Controls
To move the Operator Panel sideways, press and hold down the
left button to release and move the Operator Panel sideways
until it is in the desired position.
To park the Operator Panel, after moving Operator Panel
sideways to the desired position, release the left button. After
releasing the left button, the system will lock into position after 3
seconds.
To raise/lower the Operator Panel, press and hold down the Up/
Down toggle button (right button) accordingly to raise or lower
the Operator Panel. Release the Up/Down button when the Top
Console is in the desired height.
To manually adjust the Operator Panel, manipulate the metal
lever located in-between the slots on the rear of the LOGIQ E9.
CAUTION
When power is on, the brakes are applied to the Operator
Panel. To move the Operator Panel, release it by using the
Operator Panel Movement Controls. This helps to ensure the
life of the brakes.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor