GE LOGIQ E9 - Setting up the Off-Line Paper Printer

Measurement and Analysis
LOGIQ E9 – User Guide 2-39
Direction 5454884-100 English Rev. 1
Setting up the Off-Line Paper Printer
You can connect an off-line paper printer via the USB port on the
rear of the system.
Figure 2-8. Patient Environment
CAUTION
DO NOT place an off-line paper printer inside the patient
environment (within the dotted line area noted by “1” in
Figure 2-8). Refer to the off-board printer’s manual for details.
Peripheral devices that use their own AC power source
CANNOT be connected to the LOGIQ E9. DO NOT connect
the peripheral device’s power cord into the LOGIQ E9 system.
CAUTION
Use a USB printer cable that is less than 3 meters in length.