GE LOGIQ E9

Getting Started
1-24 LOGIQ E9 – User Guide
Direction 5454884-100 English
Rev. 1
System Start-Up
Power On
Login
Personal IDs and associated passwords can be preset on the
LOGIQ E9.
If the User Auto Logon preset is blank, you are prompted to
login.
Figure 1-13. Operator Login Window
1. Operator: Select the Operator.
2. Password: Enter Operator’s password (optional).
3. Select type of Logon or Cancel.
• Emergency: Data stored only for the duration of the
current examination.
• OK: Standard logon
• Cancel: Cancel logon
CAUTION
Press the Power On/Off switch to turn the power on. The
circuit breaker must also be in the on position. For circuit
breaker location, see ‘Circuit breaker’ on page 1-27 for more
information.