Moving the System
LOGIQ E9
–
User Guide
1-23
Direction 5454884-100 English
Rev. 1
Setting the front wheels lock
The pedal is located between the front wheels of the unit and
enables the user to control the movement of the wheels.
Figure 1-12. Front Pedal Lock/Brake
Table 1-3: Front Pedal Functions
Pedal position Function
1. Left—Swivel Lock Swivel Lock. To move the system, press the Swivel Lock to set
the wheels in a forward-to-back position. First move the system
in the direction you will be going, then press the Swivel Lock. To
release the Swivel Lock, press the center brake release (3).
2. Right—Parking Brake Park. To set the brake, press the right pedal. To release the
brake, press the center brake release.
3. Center—Brake Release Press the center brake to release the swivel lock/parking brake
(3).
When two or more people are releasing the swivel/pivot wheel
controls with the front and rear pedals, take extra precaution to
prevent unexpected movement which could result in possible
toe injuries.
To Next Page
Loading...
