GE LOGIQ E9 User Guide

Safety
4-12 LOGIQ E9 – User Guide
Direction 5454884-100 English
Rev. 1
Related Hazards (continued)
Smoke &
Fire Hazard
The system must be supplied from an adequately rated
electrical circuit. The capacity of the supply circuit must be as
specified.
WARNING
Only approved and recommended peripherals and accessories
should be used.
All peripherals and accessories must be securely mounted to
the LOGIQ E9.
WARNING
The LOGIQ E9 is not intended to be used as a data storage
device; backup of the Patient and Image Database is your
institution’s responsibility. GE is NOT responsible for any lost
patient information or for lost images.
DANGER
The concerns listed below can seriously affect the safety of
equipment and personnel during a diagnostic ultrasound
examination.
Explosion
Hazard
Risk of explosion if used in the presence of flammable
anesthetics.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor