GE LOGIQ E9 User Guide

Safety
4-24 LOGIQ E9 – User Guide
Direction 5454884-100 English
Rev. 1
Peripheral Update for EC countries
The following is intended to provide the users in EC countries
with updated information concerning the connection of the
LOGIQ E9 to image recording and other devices or
communication networks.
Peripherals used in the patient environment
The LOGIQ E9 has been verified for overall safety, compatibility
and compliance with the following image recording devices:
• Sony UP-D897 Digital Printer
• Sony UP-D23 Digital Printer
• Sony UP-D25 Digital Printer
• Sony UP-D55 Digital Printer
• Canon PIXMA MP610 Digital Printer
• HP470 Report Printer
• DVR
• Drive Bay (for Tru3D and Volume Navigation)
• USB 2.0 Flash Drive (Memory Stick)
• Hard Disk Drive
The LOGIQ E9 has also been verified for compatibility, and
compliance for connection to a local area network (LAN) via the
rear panel Ethernet connection, provided the LAN components
are IEC/EN 60950 compliant.
A Wireless LAN option is available.
The LOGIQ E9 may also be used safely while connected to
devices other than those recommended above if the devices
and their specifications, installation, and interconnection with the
system conform to the requirements of IEC/EN 60601-1-1.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor