Moving the System
LOGIQ E9
–
User Guide
1-19
Direction 5454884-100 English
Rev. 1
Before moving the system (continued)
8. Store sufficient gel and other essential accessories in the
provided space.
9. Adjust the LCD monitor and control panel to their lowest
positions by using the up/down switch on the front of the
operator panel. Make sure the operator panel is locked in
place.
10. Unlock the wheels.
DO NOT place probes into the front pocket storage area
when moving the system. This is not a storage space for
probes.
To prevent system damage while not in use AND/OR
before moving the system, flip down the monitor and lock
the monitor arm and operator panel firmly in place.
To Next Page
Loading...
