GE LOGIQ E9 User Guide

Getting Started
1-74 LOGIQ E9 – User Guide
Direction 5454884-100 English
Rev. 1
Patient Screen (continued)
Maintaining the Patient Database
1. Before starting EZBackup, select “Unlock All” on the
Utility -> Admin -> Logon screen.
Prepare the unformatted CD-R or DVD-R before EZBackup.
NOTE: Pre-formatted CD-R or DVD-R cannot be used for
EZBackup.
2. First perform EZBackup and then Backup (Patient Archive
and Report Archive).
3. Go to the patient screen, select the patients/exams to
delete. Select “Delete” to delete the selected data.
NOTE: Removing image data with the “EZMove” function does not
reduce the patient number in the database.
NOTE: Ensure that all patients are exported or backed up BEFORE
deleting them.
We recommend attaching the patient list to the EZBackup
media. Insert the media and select DICOM CD Read for the
dataflow (if you use a USB drive, select DICOM USB Drive
Read). Press the right Set key to select the patient. Press the
left Set key to bring up the print menu. Select Print and press
the right Set key to print the patient list.
CAUTION
To maintain optimum system performance and to safeguard
patient data, keep the total number of patients in the database
below 1,000.
To reduce the total number of patients in the database, perform
the following procedure.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor