GE PROPRIETARY TO GE
D
IRECTION 5308917-100, REVISION 8 LOGIQ P3 SERVICE MANUAL
Chapter 3 Installation 3-21
4.) Mounting Procedure for Color printer UP-D23MD: Connect the USB Cable to any of the usb
ports available on rear panel & connect the power cable to the rear panel Power port.
5.) Connecting Foot Switch to the system: Foot Switch USB cable can be connected to any USB
Ports of the LOGIQ P3 system in the rear panel.
Figure 3-18 Mounting The Sony UPD 897 on LOGIQ P3.
To Next Page
Loading...
