1 CHAPTER OVERVIEW
Each product has different configuration parameters according to the functions it has been designed to perform.
Ther
e is, however, a common methodology used across the entire product series to set these parameters.
Some of the communications setup can only be carried out using the HMI, and cannot be carried out using
settings applications software. This chapter includes concise instructions of how to configure the device,
particularly with respect to the communications setup, as well as a description of the common methodology used
to configure the device in general.
This chapter contains the following sections:
Chapter Overview 75
Settings Application Software 76
Using the HMI Panel 77
Line Parameters 87
Date and Time Configuration 90
Settings Group Selection 93
P54A/B/C/E Chapter 5 - Configuration
P54xMED-TM-EN-1 75
To Next Page
Loading...
