Product Overview
2067634-077 Revision B SEER™ 1000 33
Event Button
This button is used to perform the following functions:
Switch on/off the re-
corder
Press and hold for more than a second until a
beep sounds.
NOTE:
Once it has started recording, the recorder
cannot be turned off unless the battery is
removed. During recording, pressing and
holding the Event Button will activate the
wireless connectivity.
Start a recording with-
out the app
Press and release. A double beep will sound to
confirm the recording has started.
Mark an event during
recording
Press and release. A beep will sound to confirm
the event has been recorded.
Activate wireless con-
nectivity
Press and hold for more than three seconds until
a multi-beep sounds.
NOTE
Wireless connectivity will be active prior to
starting a recording. To activate wireless
connectivity after the recording has started,
press and hold the Event Button.
To Next Page
Loading...
