2067634-077 Revision B SEER™ 1000 37
3 Preparing the Recording
This chapter provides information on instructing the patient as well as on
the procedures for preparing the patient's skin, for properly placing elec-
trodes, and for starting the recording without using the app.
NOTE
You find information on using the app for starting the recording in
the sections “Using the Apple iOS App” on page 57 and “Using the
Microsoft Windows App” on page 69.
After step 6, you can proceed using the respective app for entering
patient demographic data and for checking the signal quality.
We recommend the following steps to prepare the recording. Each step is
described in detail in the following sections.
1. Instruct the patient about the required safety precautions, the re-
cording diary, and marking an event.
2. Prepare the patient’s skin.
3. Attach the electrodes to the patient.
4. Connect the ECG cable to the recorder and to the electrodes.
5. Insert a fresh battery into the recorder.
6. Switch on the recorder.
Ensure that the Event Button LED is green.
Ensure that the Hookup Guidance LED is green.
7. Start the recording.
To Next Page
Loading...
