GE SEER 1000 - After Completing the Recording; Switching Off Before the Recording Duration Has Been Reached

4
2067634-077 Revision B SEER™ 1000 49
4 After Completing the Recording
The recorder automatically switches off when the recording duration has
been reached.
CAUTION
DATA LOSS – The recorder retains the data for at least one month af-
ter the recording has finished.
Make sure the data is transferred and erased before assigning the re-
corder to another patient.
Switching Off Before the Recording Duration Has Been
Reached
NOTE
The only way to prematurely terminate a recording without using an
app is to open the battery compartment to disconnect or remove the
battery.
If the battery compartment is opened before the recording duration has
been reached, the recording ends at this time but is nevertheless stored
properly.
For terminating a recording using an app, refer to the “Device tab” section
on page 68 (for the Apple iOS app) or page 81 (for the Microsoft Windows
app).