GE SEER 1000 - Reset Application

Using the Microsoft Windows App
2067634-077 Revision B SEER™ 1000 73
4. Click Save to enter the Technician ID and close the dialog.
5. Click Logout to return to the Technician Login screen.
The first time the technician logs in, he/she will be required to set up a
new password. The default technician password is 20130114. The new
password must be at least 8 characters long. Then the technician can
begin to use the app.
To reset a technician password, the administrator has to perform the fol-
lowing steps:
1. Log in as administrator.
Touch Administration in the upper right corner and enter the ad-
ministrator password.
2. Select the technician in the list.
3. Click the U symbol to open the Edit Technician window.
4. Click Reset Password. The password of this technician is reset to
the technician default password 20130114.
5. Click Save.
6. Click Logout to return to the Technician Login screen.
Reset Application
If the administrator forgets the administrator password, the system can
be reset to default settings.
NOTICE
Reset Application deletes all the data on the app and resets it to fac-
tory defaults.
Resetting the application will:
 Restore the Administrator Password to the default password.