GE SEER 1000 - Select Recording Duration

Using the Apple iOS App
66 SEER™ 1000 2067634-077 Revision B
Select Recording Duration
To select the recording duration, touch the duration button at the bottom
of the screen and select the number of days. To set a custom duration,
touch Custom and scroll to the desired time. Then touch Set.
The Autodelete Option
The Autodelete option is a setting of the recorder. The default setting of
the recorder is Autodelete On. If this is changed, the application detects it.
To automatically delete recordings after they are read into the Holter
analysis system, set Autodelete to On.
To manually delete recordings after they are downloaded into the Holter
analysis system, set Autodelete to Off.
Start the Recording
Touch the start button at the bottom of the screen to start the
recording.
If the battery state is not sufficient, a message is displayed and the re-
cording cannot be started. Replace the battery.