GE SEER 1000 - Reset Application

Using the Apple iOS App
60 SEER™ 1000 2067634-077 Revision B
To reset a technician password, the administrator has to perform the fol-
lowing steps:
1. Log in as administrator.
Touch Administration in the upper right corner and enter the ad-
ministrator password.
2. Touch the blue arrow to the right of the technician entry.
3. Touch Reset Password.
The password of this technician is reset to the technician default
password 20130114.
4. Touch Save.
5. Touch Logout to return to the Technician Login screen.
Reset Application
If the administrator password gets lost, the app can be reset to default
settings.
NOTICE
Reset Application deletes all the data on the app and resets it to fac-
tory defaults.
Resetting the application will:
 Restore the administrator password to the default password.