GE SEER 1000 - Starting the App and Changing the Technician Password

Using the Apple iOS App
2067634-077 Revision B SEER™ 1000 61
 Delete all technician IDs and passwords.
 Delete all patient information stored in the app.
 Erase recorder pairings.
To reset the application:
1. Touch Reset Application in the Administration screen.
2. Enter the default Administrator Password: 14012013.
3. Touch Continue.
Starting the App and Changing the Technician Password
NOTE
Verify that your iOS device has Bluetooth enabled. On your Apple de-
vice, open Settings, select Bluetooth and verify that it is On.
The app is password protected to avoid unintentional access to a re-
corder. On your first login overwrite the default password and replace it
with your new password.
1. Touch the app icon to open the mobile application.
2. Enter the Technician ID that has been set up for you by your ad-
ministrator.