2067634-077 Revision B SEER™ 1000 83
8 Troubleshooting
This section explains error signs and troubleshooting recommendations.
Recorder Troubleshooting
The Event Button LED
flashes yellow once
every second.
An error tone sounds
when you try to start the
recording.
The battery is not fully charged
or the wrong battery type has
been inserted. Replace with
new alkaline battery or NiMH
rechargeable battery.
The Hookup Guidance
LED flashes yellow once
every second.
An error tone sounds
when you try to start the
recording.
Electrode or ECG cable is not
connected.
Connect the ECG cable or re-
connect loose electrodes.
To Next Page
Loading...
