Applications (Apps) – General Information
2067634-077 Revision B SEER™ 1000 55
NOTICE
The recorder consumes more power if Bluetooth wireless technology
is used. If Bluetooth wireless technology is used extensively, a desired
recording duration may not be possible.
NOTICE
Loss of range can occur if Bluetooth wireless technology and other
RF devices (e.g., WLAN) are used close to each other.
NOTE
Additional Bluetooth information for Windows administrators is to be
found in the “Using the Bluetooth Adapter” section on page 70.
In case of interruptions with the Bluetooth wireless technology, try one of
the following measures:
Do not position the devices closer than 50 cm (19.7 inches) to each
other or more than 10 m (10.9 yards) from each other.
Remove any objects from the line of sight between recorder and ap-
plication device.
Remove any possible RF interfering devices from the vicinity of re-
corder and application device.
Upon switching on the recorder, the Bluetooth module remains active un-
til the recording is started.
NOTE
Do not disconnect the USB adapter during data transfer.
Once the recording is started, the wireless connectivity will be deac-
tivated. It can be reactivated during the recording period by pressing the
Event Button for longer than 3 seconds. Thus, the signal quality can be
checked at any time.
To Next Page
Loading...
