GEDA
®
Temporary Construction Hoist PH 650
Operating Manual Page 14 of 64 BL148GB2017 / 11
4 Safety information
This safety information must be read and observed by all persons who are
entrusted with work on the hoist or who supervise or instruct such people.
Non-compliance with the safety information releases GEDA from any
liability.
4.1 Intended use
The hoists described in this manual are for use exclusively as:
• temporary building hoists for transporting material and persons in
non-public areas and for a limited number of users.
Non-intended use, non-compliance with the manual, staffing by
insufficiently qualified personnel, and the use of non-approved spare parts
releases the manufacturer from any liability.
4.2 Hoist limitations
The hoists must only be used in compliance with:
• the technical data/features
• the max. permissible load-bearing capacity
• the defined operating and environmental conditions.
4.3 Conversions / Modifications
Unauthorised conversions / modifications can have an unforeseeable
influence on the safety of the hoist. For this reason, unauthorised
modifications/alterations are prohibited. Any unauthorised modifications
that are carried out shall release the manufacturer from any liability. This
also includes welding, grinding and burning operations on the hoist, as well
as the control programs.
4.4 Linking to other machines
Control-related or functional linking to other machines is prohibited and
releases GEDA from any liability.
To Next Page
Loading...
