GEDA PH 650 - Control Unit on the Roof of the Car; Assembly Crane Control Unit

GEDA
®
Temporary Construction Hoist PH 650
Operating Manual Page 45 of 64 BL148GB2017 / 11
10.4.3 Control unit on the roof of the car
1 = EMERGENCY STOP
2 = Triggers a lubricating pulse
LEFT = increased lubricating
impulse
MIDDLE = normal lubricating
impulse
RIGHT = manually activating
lubricating impulse*)
3 = EMERGENCY lighting
4 = SCHUKO
®
socket
230 V / 6 A
5 = Connector
Dummy plug in normal mode /
assembly control / drop test
control
Example

Assembly mode / Assembly control is plugged and hold the button
10 seconds in this position
-> 20 minutes permanent lubrication.

Assembly mode / Assembly control is plugged:
-> The lubrication facility automatically lubricates with increased
impulse while driving.
10.4.4 Assembly crane control unit
This control unit is permanently connected to
the boom truck.
1 = EMERGENCY STOP (for assembly crane)
only switches off the assembly crane.
2 = Rocker switch for UP and DOWN
ATTENTION
1
2
1
2
3
4
5