GEDA PH 650 - Special Mode; Drop-Test Control; Assembly Control

GEDA
®
Temporary Construction Hoist PH 650
Operating Manual Page 44 of 64 BL148GB2017 / 11
10.4 Special mode
In addition to the operating and control elements of normal operation, the
following operating and control elements are used exclusively for particular
operating conditions (faults, installation etc.) by personnel authorised to do
so.
10.4.1 Drop-test control
Used to test the safety gear with a drop test.
The drop-test control unit must be kept locked
up by the operating company.
1 = EMERGENCY STOP
2 = Brake release buttons
3 = UP button
4 = DOWN button
10.4.2 Assembly control
1 = EMERGENCY STOP
2 = Release of the EMERGENCY STOP button
(Before the command to move, press and
hold until the ascent or descent has
finished.)
3 = Speed selector switch
Normal / Slow
4 = UP button
5 = DOWN button
1
4
3
2
1
5
3
2
4