Gema OptiStar 4.0 - Page 35

Rev. 00 03/19
OptiStar 4.0 (CG24-CP) Start-up

35
System parameter P10
fig.
17
: System parameter P10
The device can export log reports of the program run to an SD card for
test purposes and for finding defects.
If an SD card is inserted during the switching on procedure, the log
messages are also recorded onto the SD card. The data are record in the
MESSAGES.LOG file in the root directory. Once this file reaches a size of
32 MB, it is renamed as MESSAGES.1 and a new MESSAGES.LOG file
is then created.
Parameter
value
Level of detail of reports
0
no messages
1
few details
...
5
all messages
Real time timings can be impaired from a level of detail of 4.