PART 6
DISASSEMBLY
Page 156
Section 6.1
Major Disassembly
Figure 188.
6. Remove Left-side enclosure: Using a 10mm ratchet
wrench remove the horizontal 10mm bolt that connects
the side panel to the back panel. Using a 10mm socket,
remove three bolts from the base of the enclosure. See
Figure 189. Using a 10mm socket and wrench remove the
top hinge bolt and loosen the bottom bolt. See Figure 190.
Holding the roof, remove the bottom hinge bolt, remove
the side panel by sliding it forward then re-install the hinge
bolt.
Figure 189.
Figure 190.
7. Remove Fan Housing Cover: Using a 10mm socket
remove four bolts from the fan housing cover. Remove the
fan housing cover. See Figure 191.
Figure 191.
To Next Page
Loading...
Need help?
General
