AutoVu SharpX mobile installation
tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016 42
3 Attach the cable to the camera, and then tighten the outer connector ring clockwise.
IMPORTANT:
When connecting the camera cable, follow these guidelines:
• Do not tighten the connector by turning the camera cable.
• Do not turn the connector from behind the outer ring.
• Do not use any tools to tighten the connector.
4 As you turn the connector ring clockwise, move the connector up and down to make sure that the
cable connection is tight enough.
To Next Page
Loading...