Genetec AutoVu SharpX Mobile - Page 5

tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016 v
About installing wheel imaging cameras in a mobile AutoVu system . . . . . . . 43
Wheel imaging camera location . . . . . . . . . . . . . . . 44
Drilling the mounting and cabling holes for your wheel imaging camera . . . . . 45
Running a wheel imaging camera cable for a SharpX . . . . . . . . . . 46
Mounting a wheel imaging camera . . . . . . . . . . . . . . 47
Connecting a wheel imaging camera on a SharpX system . . . . . . . . . 48
Aligning a wheel imaging camera . . . . . . . . . . . . . . . 49
About AutoVu satellite hardware . . . . . . . . . . . . . . . . 51
About precise odometry . . . . . . . . . . . . . . . . . 51
Navigation hardware options . . . . . . . . . . . . . . . . 52
Installing navigation hardware for LPR Processing units that include AutoVu Navigation . 52
Installing navigation hardware when using the Navigator box . . . . . . . 53
Installing navigation hardware when using an external USB GPS . . . . . . . 53
Installing the satellite navigation hardware for SharpX . . . . . . . . . 54
Installing the GPS driver . . . . . . . . . . . . . . . . . 55
Installing the magneto coil for rear wheel drive vehicles . . . . . . . . . 56
Installing the magneto coil for front wheel drive vehicles . . . . . . . . . 58
Installing the AutoVu Navigation Option on the LPR Processing Unit . . . . . . 61
Installing the external Navigator box . . . . . . . . . . . . . . 62
Guidelines for installing the in-vehicle computer . . . . . . . . . . . . 64
About powering the in-vehicle computer . . . . . . . . . . . . . 64
Alignment scenarios for Sharp and SharpX cameras . . . . . . . . . . . 65
Overview of aligning SharpX cameras . . . . . . . . . . . . . . . 67
Setting up the tripod . . . . . . . . . . . . . . . . . . 68
Attaching the target to the tripod . . . . . . . . . . . . . . 69
Aligning the SharpX with the target . . . . . . . . . . . . . . 70
Sealing the camera cable holes . . . . . . . . . . . . . . . . 71
Completing the SharpX mobile installation . . . . . . . . . . . . . 72
Chapter2:Troubleshooting for SharpX mobile installation
System status LEDs on the LPR Processing Unit . . . . . . . . . . . . 74
Camera data-link status LEDs on the LPR Processing Unit . . . . . . . . . . 77
LED statuses on the SharpX camera unit . . . . . . . . . . . . . . 78
Troubleshooting SharpX network communication and Patroller ports . . . . . . . 80
Additional resources
AppendixA:Camera lenses . . . . . . . . . . . . . . . . . . 82
Field of view specifications for SharpX camera lenses . . . . . . . . . . . 83
Field of view specifications for SharpX VGA camera lenses . . . . . . . . 83
Field of view specifications for SharpX XGA (Standard) camera lenses . . . . . . 84
Field of view specifications for SharpX XGA (Tall) camera lenses . . . . . . . 84
Field of view specifications for SharpX XGA (Wide) camera lenses . . . . . . . 85