G-858BP Backpack Mag Operators Manual
---SYSTEM SETUP MENU---
AUDIO
DATE & TIME
COM PORT SETUP
COM & FIELD NOTE SETUP
MAGNETOMETER TEST
Real time transfer: < DISABLE >
Use COM1 port as:
< ASCII CHARACTER LOGGER >
< CONFIGURE >
Store serial data in: < ACQUIRE MODE >
QC warning level: [ 9.999 ] nT
Select DATE AND TIME, showing the date and time menu below.
DATE AND TIME MENU
Date
Month: [ 04 ]
Day: [ 24 ]
Year: [ 03 ]
Time
Hour: [ 12 ]
Minute: [ 01 ]
Second: [ 12 ]
SET TO ABOVE VALUES
12:01:12 04/24/03
Date and Time Menu.
Enter the correct values in the numeric entry fields, then highlight SET TO THE ABOVE
VALUES, and press ENTER. Remember that when you are using a base station for diurnal correction it is
critical that you set the base station clock and this clock to the same time. You do this by setting the time
slightly in the future and then pressing the ENTER key just at the times synchronize. Hit ESC three times
to return to the Main Menu.
28
To Next Page
Loading...
Need help?
General
