G-858BP Backpack Mag Operators Manual
Editing Data
Selecting EDIT LINE AND MARK from the adjust menu (above) will show the edit menu.
SIMPLE SURVEY EDIT MENU
You are currently going to:
Line: 4
Mark: 1
GO BACK TO LAST POSITION:
Line: 4
Mark: 0
DELETE LINE:
Line: 4
RETURN TO SURVEY
Simple Survey Edit Menu.
From this menu, you may delete the most recently acquired data.
The meanings of the menu items are:
GO BACK TO LAST POSITION
Selecting this will delete data to the last MARK or END LINE key press.
DELETE LINE
Selecting this will delete the most recent line. If you are in the middle of a line, the current line will be
deleted.
Examples - Recovering From Common Mistakes:
Mistakenly pressing MARK instead of END LINE at the end of a line.
This is a fairly common occurrence, and easily fixed. First, press PAUSE to halt the data
acquisition. Then press ESC to close the dialog box. Press MENU, then highlight EDIT LINE AND
MARK and press ENTER to bring up the Edit Menu, shown above. Highlight GO BACK TO LAST
POSITION and press ENTER. Next, press ESC twice, to show the Acquisition Display. Then press END
LINE. You have now corrected your mistake.
Sometimes, after pressing the MARK key at the end of a line, you might press the END LINE key
instead of PAUSE, as mentioned above. In this case, from the Edit menu you should highlight GO BACK
TO LAST POSITION and press ENTER twice. The first press takes you back to the position entered by
the END LINE key press (which is one mark spacing past where you want it to be). The second press takes
you back to where you actually want the end of line to be. Then, you press ESC twices, and press END
LINE.
42
To Next Page
Loading...
Need help?
General
