Introduction
1–2
MP-129 Water-Saver The operation of the MP-129 Water-Saver (see Figure 1–1) is controlled by
an electromechanical pressure switch (1PS) that monitors the pressure in
the sterilizer chamber. See Theory of Operation — “MP-129 Water-Saver”
on page 1–5 for a detailed description.
Water-Saver I/F Box 47A can be mounted at any convenient location near
the water-saver.
Figure 1–1. MP-129 WATER-SAVER PACKAGE
NOTE
Temperature
Control Switch
1S
Overflow
Drain Outlet
Manual
Drain Valve
Water Supply
Inlet
Water to Tank
Solenoid Valve
1SV
Reservoir
Recirculating
Pump
Ejector
Ejector
Vacuum Inlet
Water Saver
Drain Outlet
Solenoid Valve
20SV
Check Valve
9CV
Exhaust from
Sterilizer
350545-AB
Pressure
Switch 1PS
Parts Mounted
on Sterilizer
Water-Saver
I/F Box
47A
Copper Tubing
(by customer)
Click Here To View Parts List & Wiring Rev A thru E
To Next Page
Loading...
